Skip to main content

How to Build a Workflow

Send a series of emails, texts and push messages in order, with waits and yes/no checks, when something happens at your school.

Written by Ben Ryoo

A workflow sends emails, texts and push messages in order when something happens, such as a new lead or an expiring membership. You can add waits between messages, check what the member did, add or remove tags, and grant a rank along the way. Build it yourself, or describe it in words and let AI draft it. This guide shows how to build, test and track a workflow.

Workflows or automations?

  • Workflows send several messages in a row, with waits and yes/no checks. Use them for follow-up sequences.

  • Automations send one message when one event happens. See How to Set Up Automations.

Step 1: Open Workflows

Go to Marketing Tools → Workflows. The list shows each workflow's Title, Trigger, Status, Entries (how many members started it) and Last run.

Use the status filter to show Draft, Active or Paused workflows. To stop using a workflow, pause or delete it.

Step 2: Start a new workflow

  1. Click Add workflow.

  2. Choose a template, Start from a blank canvas, or Describe what you want in words to let AI draft it (see Build a workflow with AI below).

  • New lead onboarding (Recommended): follows up with leads who inquired but never came in. Up to 2 messages over 3 days.

  • Membership ending soon: reminds members before their renewal window passes. 2 messages over 14 days.

  • Birthday wishes: 2 messages on the member's birthday.

  • After a trial: reaches members who tried a class but haven't signed up. Up to 2 messages over 3 days.

NextKick saves it right away as a Draft and opens it in the builder. If you leave before finishing, you'll find it in the list as a draft.

Build a workflow with AI

Describe the flow in your own words and AI drafts it for you. You can check and change everything before you turn it on.

  1. In Marketing Tools → Workflows, click Add workflow and choose Describe what you want in words.

  2. Under What flow do you want?, describe the workflow. For example: "When the status changes to Lead, send a welcome email, then a text 3 days later."

  3. Choose the Language for members.

  4. Click Build it. It usually takes under 10 seconds.

  5. Check the AI draft. If the workflow starts from a form, choose the form under When this form is submitted, since AI can't pick a form.

  6. Click Create and edit to open it in the editor.

The AI draft shows what to check:

  • What AI decided: details your request didn't include, which AI picked for you. Check that they're right.

  • Needs your input: questions you can answer later with Edit with AI in the editor.

  • Heads up: warnings, such as a tag step that would restart the same workflow.

The workflow is saved as a draft. Nothing goes out to members until you save it and turn it on (Step 6).

Change a workflow with AI

  1. Open the workflow and click Edit with AI.

  2. Describe the change, such as "Change the wait to 5 days" or "Send a text instead of an email," then click Apply.

  3. Check the changes. Steps are marked AI added or AI edited. Click a change to open that step.

  4. Click Save. Members see the change only after you save.

To reverse an AI edit, click Undo this change. Anything you changed by hand after the AI edit is also undone.

Step 3: Set what starts the workflow

  1. Double-click the Start step.

  2. Under What starts this, choose the trigger.

  3. Fill in any extra details, such as which status or tag.

Triggers include:

  • When member status changes

  • When a lead signs up as a member

  • When staff add a lead from the Leads screen

  • When a tag is assigned

  • When an intake form is submitted

  • When a member checks in

  • When homework is assigned, or gets feedback

  • When learning center content is added

  • When a membership is assigned

  • When a store order is placed

  • When invited to an event or a promotion test

  • When promotion test status changes

  • When a rank changes

  • When a member texts a keyword

  • Based on the membership end date

  • Based on the birthday

Workflows based on the birthday or the membership end date are checked once a day at 10 AM in your school's time. Under When to send, choose Before, After or On the day.

Intake forms: for When an intake form is submitted, choose the form under When this form is submitted. Leave it empty to start when any intake form is submitted.

Text keywords: for When a member texts a keyword, enter a word under Keyword to watch for, such as TRIAL. The workflow starts when a member texts just that word to your school's number. Upper and lower case and trailing punctuation are ignored. Only texts from a registered student or parent number count, and words like STOP or HELP can't be used. Your school needs a texting number first. See How to Set Up Two-Way SMS in NextKick.

Leads: When staff add a lead from the Leads screen starts when staff select leads on the Lead list and click Add to workflow. See How to Use the Leads Page.

Step 4: Add steps

Click + between two steps and choose what to add:

  • Email: choose who it goes to under Send to: Member, Parent or Staff. Then write the subject and message.

  • Text: choose Member, Parent or Staff under Send to, then write up to 480 characters. The panel shows how many SMS credits each text uses.

  • Push: send a push notification to the student app. Push only reaches the member, so use email or text for parents and staff.

  • Wait: pause for a number of minutes, hours or days before the next step.

  • Condition: split the flow into Yes and No paths. You can check Booked a trial?, Attended a trial?, Started a membership?, Has a specific status? or Is the age within a range? For age, enter a Minimum age, a Maximum age or both, in whole years. The ages you enter are included. Members without a birth date on file take the No path.

  • Add tag or Remove tag: change the member's tags. See How to Use Tags and Groups.

  • Grant rank: give the member a rank automatically, such as a first belt when they sign up. Choose it under Rank to grant. Members who already have this rank, or a higher rank in the same rank system, are skipped, and ranks are never lowered. Granting a rank also starts workflows and automations set to start on a rank change.

Double-click a step to edit it in the panel on the right. To add the member's name or your school's name, click a custom field such as Member first name or School name. Click the trash icon on a step to remove it.

Use the zoom buttons to zoom in and out, and Auto arrange to tidy up the steps.

Example: the New lead onboarding template starts when a member's status changes to Lead. It sends a welcome email, waits 3 days, then checks Attended a trial? If not, it sends a text inviting them to book a first class.

Step 5: Choose whether members can repeat it

  1. Click ⋮ at the top right and choose Workflow settings.

  2. Under When can the same member enter again?, choose an option.

  3. Click Save.

  • Again after it finishes: a member can start it again once their previous run has ended.

  • Every time: a member starts it every time the trigger happens.

  • Only once: a member goes through it only once. This isn't available for birthday or membership end date workflows, since they need to run every time.

Step 6: Test, save and turn it on

  1. Click ⋮ → Test send, pick a member and click Run test. Nothing is actually sent. NextKick only records which steps would run and in what order, and shows the result in Run history marked as a test.

  2. Click Save to keep your changes. The workflow stays a draft.

  3. Click Activate to turn it on.

For event triggers, such as a status change, only members who meet the start condition after you turn the workflow on enter it. Members who already meet it won't receive anything.

Step 7: Track results

Open the workflow and use the tabs at the top. Both are available after you turn the workflow on.

  • Run history: who entered, their status (Running, Waiting, Completed, Failed or Cancelled), and when they entered and ended. Check Show test runs to include tests.

  • Analytics: how many members entered and completed it, how each step performed, and email open and click rates. Test runs aren't counted.

Step 8: Pause, edit or delete a workflow

In Marketing Tools → Workflows, click ⋮ on the workflow:

  • Active workflows: Pause, Edit, Run history, Analytics or Delete.

  • Draft workflows: Activate, Edit or Delete.

A paused workflow doesn't send anything, including to members who are partway through it.

Common questions

Can a workflow message parents?
Yes. In an Email or Text step, choose Parent under Send to. Push notifications only reach the member.

Does Test send message the member I pick?
No. It only records which steps would run. Check the result in Run history.

If I have an automation and a workflow for the same event, will members get both?
Yes. Turn one of them off so members don't get two messages.

Why can't I choose Only once?
Workflows based on the birthday or membership end date have to run each time, so Only once isn't available for them.

Why are Run history and Analytics empty?
They're available after you turn the workflow on.

Why don't my test runs show in Analytics?
Analytics leaves out test runs. To see them, check Show test runs in Run history.

Why doesn't my keyword workflow start?
Check that the workflow is on, your school has a texting number, and the member texted just the keyword from a registered student or parent number.

Does AI turn on the workflow it builds?
No. AI saves it as a draft. Nothing goes out to members until you check it, save it and turn it on.

Can I get help while I build a workflow? Yes. Click the chat button at the bottom right of the workflow editor to ask our AI support assistant or contact NextKick Support. It moves aside when a step's settings are open.

Related articles

Did this answer your question?